COVID-19 (Coronavirus) Updates, FAQs and Resources. Properly worn face coverings are required for entry on all PTC campuses. Read More ...
This diploma provides students with a primary technical specialty. Students completing this credential can, by taking selected general education courses and a secondary technical specialty, have the opportunity to obtain an Associate Degree in Occupational Technology with a major in General Technology.
Students should meet with their advisor to select the proper courses to meet their particular educational goals.
|GENERAL EDUCATION COURSES|
|ENG 165||Professional Communications
or approved ENG course
|MAT 170||Algebra, Geometry & Trigonometry I
or MAT 110 College Algebra
or MAT 120 Probability and Statistics
|Elective Social/Behavioral Science||3.0|
|REQUIRED CORE SUBJECT AREAS|
|MTT 120||Machine Tool Print Reading||3.0|
|MTT 121||Machine Tool Theory I||3.0|
|MTT 123||Machine Tool Theory II||3.0|
|MTT 141||Metals and Heat Treatment||3.0|
|MTT 143||Precision Measurement||2.0|
|OTHER COURSES REQUIRED FOR GRADUATION|
|MTT 122||Machine Tool Practice I||4.0|
|MTT 124||Machine Tool Practice II||4.0|
|MTT 126||Machine Tool Practice III||4.0|
|MTT 161||Machine Tool Maintenance Theory||2.0|
|MTT 250||Principles of CNC||3.0|
|Total Credit Hours||40.0|
The purpose of the Machine Tool Technology Diploma program is to provide the technical instruction and practical experience for skill development to enable the student to become gainfully employed in the Machine Tool Technology field.
To help students maximize financial aid opportunities as well as help ensure that students take their courses in the appropriate sequence, it is recommended that students entering Machine Tool Technology be admitted to the associate degree program, rather than certificate or diploma programs. The certificates and diplomas can be earned and awarded as they are completed within the associate degree program. Be aware that not all MTT courses are offered each semester, so the best practice is to advise students to take the courses as outlined in the semester-by-semester graduation plan (see below).
Developmental students enrolling in the Spring or Summer should be advised by the MTT faculty members. The math required for this program is MAT 170. Students will follow this progression, with their starting point being determined by their placement test scores: MAT 032/012 > MAT 170.To schedule developmental math, substitute in place of MAT 170 during the Fall semester.
The English required for this program is ENG 165. Students will follow this progression, with their starting point being determined by their placement test scores: ENG 032/012 and/or RDG 032/012 (or RWR 032/012) > ENG 100 and/or RDG 100 (or RWR 100) > ENG 165. To schedule developmental English, substitute in place of ENG 165 during the Spring semester.
The Machine Tool student should be prepared to purchase $350 worth of hand-tools necessary for project work. A good calculator with sine, cosine and tangent functions, along with fractional/decimal equivalent is recommended (TI-36X Solar by Texas Instruments). Safety glasses are required.
Students may earn a Machine Tool Operator certificate by completing the following courses successfully (25 cr. hrs.): MTT 121, 122, 143, 250, 120, 123, 124 and CPT 169.
MTT courses are offered during days and evenings.
This diploma is offered in Greenwood and the L-CAM (Laurens).
Ensure that first-term students take all MTT courses, even if developmental courses are needed. Ask the department head or full-time instructor for the best match. First-semester students in the FALL who are enrolled in developmental study courses should sign up for the following MTT courses: MTT 143, MTT 120, MTT 121, MTT 122. Students starting in the Spring or Summer may be advised to complete developmental and/or general education coursework so that they can begin MTT courses in the Fall semester. In some cases, students may be able to start with MTT coursework in the Spring or Summer, but starting in a semester other than Fall may affect students’ financial aid in subsequent semesters. It is best to connect with Don Lytch (at the Lex Walters Campus in Greenwood), or Phillip Calhoun (at the center for Advanced Manufacturing in Laurens), if a student needs to start MTT courses in a semester other than Fall.
Enrollment advisor: Please send the MTT academic advisor electronic notification of student's enrollment if student is not able to meet with his or her academic advisor for initial advisement.
You can find the name of your assigned academic advisor by reviewing Degree Works or your Class Schedule. To learn more about advising visit the Advising webpage.
Please email email@example.com if this advising guide needs to be corrected or updated.
Advisement Information updated/reviewed 4/2020